en_GBfr_FR
ZA du Grand Champ // F-01640 Jujurieux
+33 (0)4 74 37 15 50

FUNDY

FUNDY

//
Posted By
/
Comment0
/

The FUNDY is a compact terminal unit for air-conditioning rooms from 12m2 to 50m². FUNDY terminal units are designed for very quiet operation and are ideally suited to air-conditioning commercial and residential buildings. Only 233mm high, FUNDY terminal units can be fitted in the reduced space above false ceilings in buildings being renovated or wherever the overall height is critical.

FUNDY terminal units have intakes and outlets for which both the size and position can be customised for installation in the building. They should preferably be installed above a false ceiling in the room to be air-conditioned, close to the air diffusers and extraction grilles to which they will be connected by flexible heat insulated ducts that can also be sound insulated if required.

The maximum pressure available, the range of fan speeds, the installation flexibility, the reduced and simplified maintenance and the easy access to all parts of the terminal unit make this a very attractive choice for an intelligent air-conditioning system.

As standard, FUNDY terminal units have a multi-speed fan which can be adjusted to the heating or cooling required in each room. Optionally, FUNDY terminal units can be fitted with a variable speed DC fan controlled by a 0-10 V signal for significant energy savings (lower power consumption and operation at low speed for longer). There are two fan versions, one for low pressure ventilation (up to 50 Pa) and one for higher pressures. The system can be controlled by a wall thermostat or a user control panel via a network.

FUNDY terminal units are available in all standard configurations: 2 pipe change-over, 2 pipe + electric heater and 4 pipe systems. The on / off water valves are controlled by an electronic regulator providing accurate control for the room to be air-conditioned. The electric heaters used for a 2 pipe + electric heater system are fitted as standard with a manual reset over temperature switch and a thermal fuse.

The FUNDY electronic regulator can be connected to a Building Management System and accessed at any time by the building manager to change the operating parameters.

The FUNDY is a modular system, suitable for air-conditioning moderate sized spaces in intelligent buildings.This slim-line unit, 233mm high, is enclosed in a 0.8mm thick galvanised steel casing lined with 8mm thick Melamine foam covered with an aluminium film (Euroclass B). As an option, the FUNDY terminal units can be supplied with extra thick foam to reduce the noise emissions.

FUNDY terminal units have 4 suspension brackets as standard with elastic anti-vibration studs specially designed to support the weight of the unit and absorb the vibration.

Description

  1. Ideal for: rooms from 12m2 to 50m², maximum cooling
  2. Advantages: 4 sizes for various applications, very quiet, substantial savings during installation and maintenance
  3. Applications: large and small commercial buildings, hotels, residential buildings, intelligent buildings for air-conditioning medium sized spaces
  4. Installation: in the reduced space above false ceilings in buildings being renovated or wherever the overall height is critical

Above a false ceiling or below a false floor in the room to be air-conditioned, close to the air diffusers and extraction grilles to which they will be connected by flexible heat insulated ducts that can also be sound insulated if required

  1. Used with: a Building Management System connected to the FUNDY electronic regulator so that the building manager can change the operating parameters at any time
  2. Plus points: flexible installation, easy and low maintenance, easy access to all parts

 

Physical and electrical characteristics

  1. Dimensions: slim-line unit, 233mm high, is enclosed in a 0.8mm thick galvanised steel casing lined with 8mm thick Melamine foam covered with an aluminium film (Euroclass B). As an option, FUNDY terminal units can be supplied with extra thick foam to reduce the noise emissions
  2. Components: multi-speed AC fan or low power consumption, variable speed EC fan, 2 to 6 water coils, electric heaters from 500 to 2000 W, four suspension brackets with elastic anti-vibration studs designed to support the weight of the unit and absorb the vibrations
  3. Options: variable speed DC fan controlled by a 0-10 V signal for significant energy savings (lower power consumption and operation at low speed for longer). There are two fan versions, one for low pressure ventilation (up to 50 Pa) and one for higher pressures. The system can be controlled by a wall thermostat or a user control panel via a network
  4. Models: all standard configurations: 2 pipe change-over, 2 pipe + electric heater and 4 pipe systems. The on / off water valves are controlled by an electronic regulator providing accurate control for the room to be air-conditioned. The electric heaters used for a 2 pipe + electric heater system are fitted as standard with a manual reset over-temperature switch and a thermal fuse
  5. Options: LON or BacNet control network, class G4 filter, CO2 sensor, variable flow, fresh air input. Connections on the same side or on opposite sides, intakes and outlets 200mm in diameter or 250mm oval.
Télécharger Devis